5 Quick Maintenance Tips Every Gas Moped Owner Should Know

As gas moped owner, there are a few quick maintenance tips you should understand, which will help you keep your bike in optimal condition.

The reason for this is there's a reason that gas-powered scooters continue to be the top selection for everyday commuting throughout Mississippi. The 150cc moped or high-efficiency moped scooters 50cc advance one of the simplest solutions to avoid the lofty costs of gas and lower expenditure for the typical seven-day get-away to work and back by transitioning to a moped.

To keep your machine running smoothly, fast, and responsive on an ongoing basis, though, a little time in between the seasons is needed for regular care and attention. Scooters with one-cylinder engines are delightfully easy to service, so there are no costly mechanic bills to keep you from a good ride.

Here are 5 essential tips that every owner should follow whether you ride around town or up and down the freeway on a smaller gas moped or a 150cc gas moped that complies with city bike regulations.

Fuel System Care & Engine Lubrication

1. Maintain Carburetor Cleanliness (Don't Let Stale Gas Clog the Carburetor)

The most frequent gas scooter no-start after sitting for a while is due to a carburetor blockage. Ethanol mixed into modern fuel begins to turn brittle and sticky after about 30 days, which damages the fuel to the point of causing varnish to clog the very small fuel jets.

• Use Clean 87+ Octane Gas: Always use Fuel Gas of Quality "Fuel 87+".

• Add Fuel Stabilizer: Put a couple of drops into the fuel system when not used for several weeks.

• Drain the Bowl: If storing your machine for the winter, shut off the fuel line and drain the carburetor float bowl.

With knowledge of basic fuel care, your delightful gas moped will start off on the first push of the electric start button.

2. Check Engine & Gear Oil Regularly

Scooter engines have less than a quart of engine oil in them, and they are driven at very high RPMs, which causes engine oil to have to work hard to get the internal parts of the engine enough lubrication and cooling.

• Engine Oil: Change your oil every 500 to 1,000 miles (or at the start of every spring). New 10W-40 or 15W-40 engine oil helps to delay cylinder wear.

• Gear Oil: Remember the last drive gear box, which is towards the rear wheel. Changing your rear gear oil once a year will allow your automatic transmission to keep going smoothly.

Tire Pressure, Drive Belt, & Spark Plug Care

3. Check Tire Pressure and Tread Depth

On soft or under-inflated tires, the rolling resistance will have a negative impact on fuel consumption, and the handling will be awkward in sharper turns.

• Use a simple PSI tire pressure gauge to check tire pressure every two weeks.

• Tires should be inflated to the recommended PSI (suggested 28-32 PSI for street mopeds).

• Check the tread for cracks or other objects that may be caught in wet pavement to make sure it is fully safe.

4. Perform Drive Belt & Spark Plug Inspection

Modern scooter bikes and mopeds utilize a “continuously variable transmission” (CVT), which is a belt driven by the power of rubber inside the engine casing.

• CVT Belt: Check CVT belt for cracks or fraying every 2,000–3,000 miles. A new belt will not cause sudden loss of power while driving.

• Spark Plug: Remove the spark plug once a year. If the plug tip smells like oil, is black or blackened, replacing it (with a new one, of course) ensures a clean burn and consistent acceleration.

Electrical Systems & Commuter Readiness

5. Stave Off Electrical Connections & Lights Hazards

Your scooter must be street legal; all the lights, turn signals, brakes, and horn must work.

• Test lights before longer rides.

• Clean and uncorrode 12V terminals. Hook the scooter battery up to a battery trickle charger during cold weather to keep the battery full.

Conclusion

Ride Safe With Mississippi Power Sport!

These simple services performed each month can save you hundreds of dollars in repair expenses and help to make your commute safe and dependable.

From providing ultra-frugal, affordable moped options to replacement tuning and parts, and building a brand new 150cc moped, the team at Mississippi Power Sport has got you covered!

Come check out our fresh inventory and street ready prices today at Mississippi Power Sport! Whether you're looking for a basic setup or a high-performance commuter, Mississippi Power Sport offers the utmost factory-direct value without any hassle, delivered all the way to your door!